Milorganite is a renowned fertilizer brand that has gained popularity in both the US and Canada. It is widely recognized as one of the most effective nitrogen-based fertilizers available, making it a top choice for those who are experienced in lawn maintenance. Rather than being a conventional straight fertilizer, Milorganite is often referred to as a soil treatment due to its high nitrogen content, which is its primary component.
Applying fertilizers, soil treatments, and insecticides require the correct spreader settings to ensure optimal results. Using inaccurate settings can lead to unsatisfactory outcomes. It’s crucial to obtain the appropriate spreader settings for your equipment, but if unavailable, it’s best to find a close match to achieve the desired outcome.
Milorganite Spreader Settings Guide
This article presents a set of commonly used spreader settings for popular lawn spreaders in the US and Canada. If your spreader type is not listed, you can refer to the quick spreader calibration guide provided below to determine the appropriate settings.
Milorganite Settings for Rotary Spreaders
| Spreader | Settings for Established Lawn | Settings for New Lawn |
| Ace Green Turf Delux | 19 | 19 (two passes) |
| Agway | 19 | 19 (two passes) |
| Earthway EV-N-Spread (most models) | 19 | 19 (two passes) |
| Fertilome | 19 | 19 (two passes) |
| Green Thumb | 19 | 19 (two passes) |
| Lawn Crafter (Quacker) | 5 | 5 (two passes) |
| Precision | 9 | 9 (two passes) |
| Red Devil | 17 | 17 (two passes) |
| Republic EZ | 14 | 14 (two passes) |
| Scotts Edgeguard (Pro, Mini), Lawn Pro & Standard | 11.5 | 11.5 (two passes) |
| Scotts basic, Delux Edge Control & Speedy Green Series | 11.5 | 11.5 (two passes) |
| Scotts Easy Green | 29 | 29 (two passes) |
| Southern States | 19 | 19 (two passes) |
Milorganite Settings for Drop Spreaders
| Spreader | Settings for Established Lawn | Settings for New Lawn |
| Ames/Earthway | 21 | 21 |
| Lawn Crafter (Quaker) | 8 | 13 |
| Red Devil | 11 | 12 |
| Republic WZ Grow | 8 | 11 |
| Scotts Accu Green Series | 10 | 16 |
When spreading fertilizer on new lawns, it is generally recommended to make two passes to ensure optimal nitrogen absorption. However, the guidelines for spreading fertilizer on new lawns versus established lawns will differ in terms of the recommended quantity.
Milorganite Spreader Settings Guidelines
| General Settings | Application |
| Established Lawn | 2,500 sq. ft. per 32 lbs. bag |
| New Lawn | 1,250 sq. ft. per 32 lbs. bag |
| Weight Conversion | 3 cups of Milorganite = 1lbs. |
It’s important to note that the spreader settings provided in this article should only be used as a general guide. To determine the appropriate settings for your lawn, it’s advisable to mark out a small test area and observe the potential results before applying the fertilizer to the entire lawn.
Quick Spreader Calculation Guide
In case your spreader is not listed in the chart, this quick and easy five-step guide will assist you in determining the correct settings for spreading milorganite. Moreover, this guide can also be utilized for any type of lawn spreader and various soil treatment materials to address similar issues during the spreading process.
- Adjust your spreader settings to three-quarters of the entire settings gauge.
- Measure 6.5 pounds of milorganite and pour it into the spreader.
- Begin spreading the milorganite while walking at a consistent pace (ideally 3.5MPH), ensuring that the spreader bucket is emptied completely.
- Measure the area of the lawn that you have treated, which should be approximately 500 square feet. If the area you have treated is close to 500 square feet, you may proceed to skip step 5.
- If your measurement reveals a significant deviation from the target 500 square feet, you can modify the size of the openings on your spreader and repeat steps 2 to 4 until you achieve a more accurate coverage area closer to 500 square feet.
Lawn Spread Application Tips
- It’s crucial to avoid hand-spreading products. In case you need to handle the product manually, try to limit contact as much as possible. Ideally, it’s best to wear gloves throughout the application process.
- Before adding the product, make sure to close the hopper to prevent fertilizer or soil treatment granules from scattering and creating a mess.
- Be sure to clear the surrounding walkways and the surface where you measured and prepared the product. If you accidentally spill a significant amount of the product, you can collect it and return it to the bag. However, if it’s a small amount, you can sweep it onto the lawn.
- If a significant amount of milorganite is accidentally dumped onto the lawn, collect as much as possible and use a stiff broom to evenly distribute the remaining granules.
- When applying the fertilizer, maintain a steady walking pace to ensure even distribution. Keep in mind that the slower you walk, the more product will be deposited, so be mindful not to over-apply and waste the fertilizer.
- When using drop spreaders, it’s important to overlap the wheel marks to achieve uniform coverage.
- To ensure even application, always start from the longest edge of your lawn. However, if you need to calibrate your spreader using a test area, you may need to adjust your starting point accordingly.
- To avoid depositing milorganite on hard surfaces around your lawn, it’s best to complete a turn before reopening the spreader during application.
- To ensure even coverage of the lawn, apply the product while walking in opposite directions after each turn. Use a simple back-and-forth movement to cover the entire area. If a second application is necessary, reduce the spreader settings by half and apply the product in a crisscross pattern for maximum efficiency.
- After use, it is essential to clean the spreader thoroughly. Any residue left in the hopper can affect the spreader’s accuracy during future applications.
- It’s essential to follow the manufacturer’s instructions for cleaning, lubricating, and storing the spreader after use. This ensures that the spreader remains in good condition and that any residue or debris is removed, preventing potential issues that could affect future use.
Frequently Asked Questions
Table of Contents
Please be advised that Pennington Fast-Acting Lime is not intended for use as a snake repellent, but rather for balancing soil pH levels to support healthy plant growth. To keep snakes away from your yard, we recommend using a suitable snake repellent.
- Earbuds Not Charging - April 18, 2024
- Sony WH-1000XM4 Not Charging - April 7, 2024
- Vuse Not Charging - February 25, 2024
Table of Contents
Pennington Fast-Acting Lime can be effortlessly applied using any spreader, including a broadcast spreader.
- Earbuds Not Charging - April 18, 2024
- Sony WH-1000XM4 Not Charging - April 7, 2024
- Vuse Not Charging - February 25, 2024
Table of Contents
Please note that Pennington Fast-Acting Lime does not possess insecticidal properties and, as such, is not effective in killing fleas in your yard. To combat such infestations, we suggest using an appropriate pesticide.
- Earbuds Not Charging - April 18, 2024
- Sony WH-1000XM4 Not Charging - April 7, 2024
- Vuse Not Charging - February 25, 2024
Table of Contents
For the best results, it’s recommended to apply this product during the spring and mid-fall seasons, just before the first frost. This allows the lawn to absorb the nutrients through the winter months.
- Earbuds Not Charging - April 18, 2024
- Sony WH-1000XM4 Not Charging - April 7, 2024
- Vuse Not Charging - February 25, 2024
Conclusion
In conclusion, using the correct spreader settings for Milorganite is crucial for achieving an even and effective application of this organic fertilizer. It is recommended to refer to the product packaging, manufacturer’s instructions, or seek guidance from Milorganite customer support or gardening experts to determine the appropriate settings.
The spreader settings may vary depending on the type of spreader, lawn size, specific application requirements, and even the season. It is important to adjust the settings accordingly to ensure optimal results and avoid over or under-fertilization. By following the recommended spreader settings, you can promote healthy plant growth and maximize the benefits of using Milorganite as a fertilizer for your lawn or garden.
- Earbuds Not Charging - April 18, 2024
- Sony WH-1000XM4 Not Charging - April 7, 2024
- Vuse Not Charging - February 25, 2024