The Equinox 800 is a popular choice among treasure hunters because of its advanced features that increase their chances of success. To fully utilize these benefits, it is important to understand the device’s settings.
The Equinox 800 metal detector has a wide range of settings for different purposes. Without proper knowledge of how to use these settings, the results may not be as desired. However, with a comprehensive guide, such as this article, the user can prevent this outcome.
Equinox 800 Settings Explained
Here is a list of adjustments for the Equinox 800. This article provides detailed information, but it is recommended to refer to the manufacturer’s manual for additional guidance. Let us begin.
Noise Cancel
The Noise Cancel feature of the Equinox 800 helps to eliminate any disturbances from sources such as power lines or other metal detectors. The device offers two options for Noise Cancel: Auto and Manual.
Instructions for using Auto Noise Cancel (suggested settings):
- Keeping the coil stable and elevated from the ground
- Activating the Settings Menu
- Navigating to the Auto Noise Cancel setting in the Settings Menu.
- Confirming or denying the setting using the Accept or Reject button.
Pausing for a few seconds to allow the detector to show the optimal channel and play three tones. Exiting the menu by pressing the Detect Mode or Pinpoint Detect Mode button.
Ground Balance
The Noise Cancel feature helps to eliminate background noise from the ground that could disrupt your metal-detecting efforts. There are three Ground Balance modes available (Manual, Auto, and Tracking Balance), but for optimal results, it is recommended to use Auto Ground Balance.
Instructions for using Auto Ground Balance (suggested for Park, Field, and Beach Modes):
- Accessing the Ground Balance setting: Press the Settings button, navigate to the Settings Menu, and select Ground Balance.
- Confirm the Ground Balance setting by holding down the Accept/Reject button.
- Locating an area with a clear, target-free patch of soil.
- Moving the coil up and down.
- Waiting for the Target ID display to indicate a solitary number.
- Releasing the fingers from the Accept/Reject button.
Instructions for using Tracking Ground Balance (suggested for Beach Mode 2):
- Accessing the Ground Balance setting: Press the Settings Menu and select Ground Balance.
- Activating Ground Balance by pressing the Accept/Reject button.
- Returning to the Detect screen while the Ground Balance operates in the background.
Volume Adjust
The Volume setting is used to amplify or adjust the detector’s sound. The default volume level is typically set at 20.
Go to Settings Menu – Volume Adjust
Toggle the volume with the Plus (+) or Minus ( -) button.
The Tone Volume setting is suggested for locations with a high amount of iron and is used to adjust the volume of each tone category. The default tone volume is 25 for non-ferrous tones and 12 for ferrous tones, but these values can be altered by reducing the ferrous tone volume to zero and increasing the non-ferrous tone volume.
- To access the Volume Adjust setting: Press the Settings button, then select Settings and Volume Adjust.
- To activate the Volume Adjust setting, hold the Settings button for two seconds.
- To change the volume of a tone region, use the Plus (+) or Minus (-) button.
- To move to the next tone region, press the Accept/Reject button.
- Repeat the process of pressing the Plus or Minus button and then the Accept/Reject button to adjust the volume of each tone region until all regions have been adjusted.
- Press and hold the Settings button until you reach the main menu.
Threshold Level
The Background Sound setting allows you to control the background noise of the detector. Four modes are available: Park, Field, Beach, and Gold.
To change the settings for each mode:
- Access the Threshold Setting through the Settings Menu.
- To adjust the Threshold level, access the Settings Menu and then use the Minus (-) or Plus (+) button.
Threshold Pitch
- Access the Threshold setting through the Settings Menu.
- Press and hold the Settings button for a duration of two seconds to access the Threshold settings.
- Use the Plus (+) or Minus (-) button to adjust the threshold tone.
- Press and hold the Settings button until you reach the Threshold Menu.
Target Tone
This option enables you to divide the Target ID into multiple tone zones. To modify this setting:
- Navigate to the Settings Menu – Target Tone.
- Select the desired number of audio tones using the Plus (+) or Minus (-) button.
Tone Pitch
This feature is utilized to regulate the target response pitch.
- Access the Settings – Target Tone.
- Hold down the Settings button for 2 seconds.
- Adjust the tone pitch by using the Plus (+) or Minus (-) button.
- Advance to the next tone region by pressing the Accept/Reject button.
- To go back to the Target Tone settings, long-press the Settings button.
Accept /Reject
This Equinox 800 Settings allows you to tailor discrimination patterns to determine if an item is valuable or worthless.
- Navigate to the Settings – Accept/Reject.
- Scroll through the Target IDs using the Minus (-) or Plus (+) button.
- Toggle the Target ID on or off by pressing the Accept/Reject button.
- Repeat the preceding steps until all Target IDs have been enabled/disabled.
Tone Break
This setting enables you to modify the ending position of each Tone Region. The Equinox 800 permits you to adjust tone regions t1, t2, t3, and t4.
To adjust the Tone Break on this device:
- Access the Settings Menu – Accept/Reject.
- Hold down the Settings button for 2 seconds.
- Choose the desired Target ID to use at the end position by scrolling.
- Press the Accept/Reject Button.
- To return to the main settings level, long-press the Settings button.
Recovery Speed
This setting regulates the rate at which the detector identifies targets in succession. Typically, it’s optimized for locating numerous targets in a cluttered area with smaller target zones.
- Navigate to the Settings Menu – Recovery Speed.
- Press and hold the Settings button for 2 seconds.
- Switch between the Iron Bias FE and Iron Bias F2 using the Accept/Reject button.
- Modify the speed by pressing the Plus (+) or Minus (-) button.
- Perform a long press on the Settings button.
How Deep Can Equinox 800 Detect?
The Equinox 800 is capable of detecting targets at a depth of 3 meters/10 feet, making it a perfect tool for locating treasures underwater.
How Good is the Minelab Equinox 800?
The Equinox 800 is a top-notch metal detector, thanks to its cutting-edge technology for detecting targets in diverse environments. Additionally, its ease of use makes it suitable for users of all skill levels, without requiring any technical knowledge.
Equinox 800 Manual
If you’re in need of the Equinox 800 manual, you can first check the box that your metal detector came in. If it’s not there, you can perform an online search to find and download a digital version.
Frequently Asked Questions
Table of Contents
- Earbuds Not Charging - April 18, 2024
- Sony WH-1000XM4 Not Charging - April 7, 2024
- Vuse Not Charging - February 25, 2024
Table of Contents
You can access the Settings menu by pressing and holding the Settings button for 2 seconds.
- Earbuds Not Charging - April 18, 2024
- Sony WH-1000XM4 Not Charging - April 7, 2024
- Vuse Not Charging - February 25, 2024
Table of Contents
Go to the Recovery Speed settings, press and hold the Settings button, and use the Plus (+) or Minus (-) button to increase or decrease the speed.
- Earbuds Not Charging - April 18, 2024
- Sony WH-1000XM4 Not Charging - April 7, 2024
- Vuse Not Charging - February 25, 2024
Table of Contents
Go to the Target Tone setting and use the Plus (+) or Minus (-) button to choose the desired number of audio tones.
- Earbuds Not Charging - April 18, 2024
- Sony WH-1000XM4 Not Charging - April 7, 2024
- Vuse Not Charging - February 25, 2024
Table of Contents
Go to the Accept/Reject settings and use the Plus (+) or Minus (-) button to scroll through the Target IDs and press the Accept/Reject button to turn them on or off.
- Earbuds Not Charging - April 18, 2024
- Sony WH-1000XM4 Not Charging - April 7, 2024
- Vuse Not Charging - February 25, 2024
Table of Contents
Go to the Accept/Reject settings, scroll to the desired Target ID, and press the Accept/Reject button.
- Earbuds Not Charging - April 18, 2024
- Sony WH-1000XM4 Not Charging - April 7, 2024
- Vuse Not Charging - February 25, 2024
Conclusion
The Equinox 800 offers a variety of customizable settings, including Target Tone, Accept/Reject, Recovery Speed, and more. These settings can be adjusted through the Settings menu, using the Plus/Minus buttons, and the Accept/Reject button. To access these options, you will need to press and hold the Settings button for two seconds. Once you have found the right setting for your needs, you can use the long press of the Settings button to return to the top level. The Equinox 800 is an advanced metal detector that makes it easy for users to find treasure, even in challenging environments like water. To access its manual, you can check the box that came with your device, or search for a digital version online.
- Earbuds Not Charging - April 18, 2024
- Sony WH-1000XM4 Not Charging - April 7, 2024
- Vuse Not Charging - February 25, 2024